New Sweep-N-Fill II Free Demonstrations available.

Dream Turf Sweep-N-Fill II operates from two ground driven wheels mounted within the outer frame. This photo shows Sweep-N-Fill II in the operating position with the towing wheels lifted.	Sweep-N-Fill II's hitch is engineered to accommodate many tow vehicle heights. By adjusting the hitch higher or lower, the operator can be sure the brushes are working the surface properly.	Heavy duty construction throughout the drive mechanism results in a long service life with trouble free operation. Sweep-N-Fill II's unique gearing allows the operator to tow at any speed necessary to obtain the surface finish desired. Notice the turf-friendly tread on all tires.	Secure mounts with industrial grade bearings allow Sweep-N-Fill II's brushes to move freely.	The brush mounts are fully adjustable so the operator can position the brushes to the proper height. Can be set to allow brushes to float to follow the undullation of the turf surface.

Results that Pay in Time and Money

Most operators only need 15 to 20 minute for every 7,000 square feet of green being worked.

One person is all that is required to perform a complete brushing of top dressing sand from total filling of holes to a mowing-ready surface. Greens are normally finished in two or three passes.

One golf course has eliminated four positions in the clean-up process following core aerification.

Built by a Professional for Professionals

Fills aerified holes and cleans turf surface of aerified greens amazingly fast and complete.

Grooms greens and removes grain after a few uses. (Brush greens to lift lateral growth. Then mow afterwards).

Brush in routine top dressings (Effectively places sand in crown of plant).

Fill divots on tees and heavily used areas of fairways (Great on practice range tee).

Grooms, Infill synthetic Turf, Sport Fields (Outstanding at redistributing sand and rubber infill while lifting turf fibers).

Dream Turf Sweep-N-Fill II Works Stadium Turf Also!

If your work involves turf, Sweep-N-Fill II can save hours of labor that equates to dollars. The many uses of Sweep-N-Fill II will prove invaluable to your maintenance operations. From turf preparation, to clean-up, Sweep-N-Fill II will consistently provide solutions to problems in and around your facility.

Sweep-N-Fill II , Versatility and Utility

Some possible applications of Sweep-N-Fill II include:

• Turf resurfacing to remove the grain.
• Cleaning debris from soiled areas.
• Pulling up turf in heavily traveled areas.
• Sweeping sand/dirt off turf and into infield areas.
• And many more...